Filter
Top Products
Export Sonic Immersion System Dealer Installation Guide
Table 2 Required Tools
Electric drill
1 ½ inch (3.8 mm) hole saw
¼ inch (6.35 mm) drill bit
3/8 inch (9.5 mm) drill bit
Saber Saw
Phillips screwdriver
Tape (masking, electrical, duct, or
packaging) ½ in (12.7 mm) width
Spring-loaded punch
(or other tool(s) that can be used to
mark drilling locations, such as a
hammer & nail)
Fine Point Marker
Measuring Tape
Fish Tape
Fish Tape Lubricant
Non Ratcheting PVC Pipe Cutter
4