Filter
Top Products
Export Sonic Immersion System Dealer Installation Guide
Installation of CD Player Door and Bezel
If the bezel is not removed from the door assembly (P/N 01564-04),
remove it by pulling from the bottom of the bezel and then proceed as
follows, see Figure 40:
1. Door Assembly 2. Bezel
Figure 40. Bezel and Door Assembly
2. Place the door assembly in the cutout. Make certain the door
will open and close freely. Door should open from bottom.
3. Locate 4 # 8 x 1” (2.54 cm) SS Truss Head screws (P/N
01011-40) provided with kit. Using an electric screwdriver
attach the door assembly to the panel, Figure 41.
Note
To prevent wood panels from splitting,
driil pilot holes before installing the
door assembly.
37