Filter
Top Products
Export Sonic Immersion System Dealer Installation Guide
Wiring the Power Supply
1. Locate the end of the harness that has a green, black, and
white wire (with connectors). Remove lower control box
cover. Insert these wires through the hole in the bottom of
the lower control box, Figure 31.
1. Wires Inserted through Hole in Bottom of Lower Control
Box
Figure 31. Inserting Wires in Lower Control Box
2. Using a 5/16” (7.9 mm) nut driver or wrench remove the
5/16” (7.9 mm) nut that secures the ground wires to the
bottom lower control box, see Figure 32.
30