Filter
Top Products
Export Sonic Immersion System Dealer Installation Guide
woofer compartment, the wires and cables can be connected
to the amplifier in the sub-woofer compartment. You may
want to trim off some of the harness because it could be
longer than necessary. Make sure that when the wires are
connected to the amplifier that the amplifier can be moved
out to make adjustments. Using a wire stripper, strip
approximately ½ inch (1.27 cm) of insulator from the 3
conductor wires, Figure 18.
Figure 18. Stripping Wires
7. Connect the black wire to the terminal marked GND.
Connect the red wire to the terminal marked “+ BATT”, and
connect the blue wire to the terminal marked “REMOTE”,
Figure 19.
22