Filter
Top Products
Export Sonic Immersion System Dealer Installation Guide
5. Continue installing the wire until you reach the panel where
the sub-woofer compartment has been installed. Now use the
Cable Tyes and Cable Mounts to attach the wire to the wood
until you reach the sub woofer compartment, Figure 47.
1. Speaker Wires Coming from Satellite Speakers
Figure 47. Satellite Speaker Wires in Sub-Woofer
Compartment
6. Trim any excess wire leaving enough to connect the amplifier
and approximately 12 inches (30.5 cm) of slack. Then strip
approximately ½ “ (12.7 mm) of insulator from each wire.
7. Connect the wires to amplifier as shown in Figure 48.
44