Filter
Top Products
E
N
G
L
I
S
H
E
S
P
A
Ñ
O
L
F
R
A
N
Ç
A
I
S
Dayton
®
Generator
Operating Instructions & Parts Manual 2ZRP8, 2ZRP9
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
E
N
G
L
I
S
H
E
S
P
A
Ñ
O
L
F
R
A
N
Ç
A
I
S
Unpacking
When unpacking the unit, carefully
inspect for signs of obvious or concealed
freight damage. If damage does exist,
file a claim with the transportation com-
pany immediately. Be sure that all dam-
aged parts are replaced and that the
mechanical and electrical problems are
corrected prior to operation of the unit.
Tools Required: Philips #2 screwdriver
Specifications
Model ................................2ZRP8 ..........2ZRP9
Engine...............................Honda .........Honda
Watts (AC) Rated ................5000 ............6500
Watts (AC) Max. .................6000 ............7500
Rated Voltage (AC) .... 120V/240 ....120V/240
Max. Amperage ...........35.0/25.0 .....62.5/31.3
Cont. Amperage ..........41.7/20.8 .....54.2/27.1
Frequency ............................60Hz ........... 60Hz
Fuel Tank Capacity .........7.3 gal. ........7.3 gal.
Run Time .........................8.0 hrs .........6.9 hrs
Dimensions (in) ............. 29L x 24.4W x 22.5H
General Safety Information
READ OPERATING INSTRUCTIONS
Always become familiar with all the
instructions and warnings before
operating any generator
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk
of injury, read this
operator’s manual completely before
using. When using this product, the
following basic precautions should
always be followed:
1. Read all the instructions before using
the product.
2. Do not allow children or untrained
persons to operate the generator.
3. Do not operate the generator when
fatigued or under the influence of
drugs or chemicals. Stay alert. Watch
what you are doing.
4. Follow the maintenance instructions
specified in this manual.
5. When starting the generator, using
recoil starter grip, be sure that
nothing is in a position to be hit by
the operator’s hand or arm.
6. Be sure the switch on electric power
tools is in the “OFF” position before
plugging them into the generator.
7. Keep the immediate area free of all
bystanders.
8. Be sure each person who operates
this generator is properly instructed
in its safe operation.
9. Do not operate the generator or any
electrical tool in any area where
water or similar materials constitute
an electrical hazard to the operator.
Do not operate on wet surfaces, in
rain or in snow.
10. Always be sure that the generator is
on secure footing so that it cannot
slide or shift around, endangering
workers.
11. Avoid contacting the hot exhaust
manifold, muffler or cylinder(s).
Keep clear of all rotating parts.
12. Unless the tool or appliance
is double insulated, it must be
grounded through a properly
grounded receptacle. (See
Preparing the Generator, Grounding
Instructions). Tools and appliances
Description
This Dayton generator was constructed with the highest level of precision and
accuracy. Each component has been rigorously tested by technicians to ensure the
quality, endurance and performance of this generator.
37-1023 091208
Form 5S6238
Printed in U.S.A.
06272
0908/433/VCPVP