Filter
Top Products
14-21
14. PERIODIC SERVICE
Sc2400 Operator’s Manual
■ Greasing and Lubricating
IMPORTANT: Prevent damage.
●Use the recommended Cub Cadet Yanmar
greases to avoid failed or prematurely worn parts
and components.
●The recommended Cub Cadet Yanmar greases
perform efficiently in an average ambient
temperature range from –20 to +275 °F (–29 to
+135 °C)
●If you want to operate your tractor outside this
temperature range, contact your local Cub Cadet
Yanmar dealer for applicable special-purpose
greases.
Use Cub Cadet 251H EP Grease or General all
purpose grease NLGI grade No.2 or equivalent.
1. Lubricating Grease Fittings on the Tractor
[Extremely wet or muddy conditions]
Lubricate the grease fittings once every 10 operating
hours or once a day.
[All other conditions]
Lubricate the grease fittings once every 50 operating
hours.
(A) Forward and reverse drive pedal rod end
2. Lubricating the Implement Control Lever Linkage
(A) Lubricate the implement control lever linkage
Lubricate the implement control lever linkage with
Cub Cadet GEAR LUBE.
P3014924
(A)
P3014925
(A)