Filter
Top Products
5-4
5. NAMES AND FUNCTIONS OF COMPONENTS
Sc2400 Operator’s Manual
(8) Headlight / Work Light / Turn Signal Switch
Use the blue lever to turn ON/OFF the headlights
and work lights. Turning the blue lever to the (b)
position illuminates the headlights and turning it to
the (c) position illuminates the work lights and
headlights at the same time.
The yellow lever is a turn signal switch. Move the turn
signal switch right to signal a right turn. Move the turn
signal switch left to signal a left turn.
The tail light illuminates while the headlight
illuminates. When the turn signal light is illuminated
or blinked, the tail light similarly illuminates or
flashes.
(A) Blue lever (Headlight / work light switch)
(B) Yellow lever (Turn signal switch)
(a) OFF
(b) Headlights ON
(c) Headlights and work lights ON
(d) To signal a left turn, move the lever to left
(e) To signal a right turn, move the lever to right
(9) Hazard Lights Button Switch
Depress the red button to turn the hazard lights ON.
Pressing this button will cause the button to light up
and the hazard lights at the rear of tractor to flash.
(The hazard lights remain flashing even when the
starter key switch is in the OFF position. Remember
that allowing the turn signal / hazard lights to flash for
an extended period can lead to loss of battery
voltage.)
(a) ON
(b) OFF
3014903
(9)
(8)
A3014901
(a) (b) (c)
(A)
(B)
A3014902
(d)
(e)
3013729
(a) (b)