Filter
Top Products
28
LUBRICATION AND MAINTENANCE CHART
† More often when operating under dusty conditions
Ref.
No.
Operation to
be Performed
Service Intervals
Before
each use
Every 10
Hours
Every 25
Hours
Every 50
Hours
Every 100
Hours
Every 200
Hours
Every 250
Hours
Every 300
Hours
Every 500
Hours
Every 1000
Hours
Before
Storage
1 Check Engine Oil Level
•
2 Check and Clean Air Cleaner
•
3 Check Engine Coolant Level
•
4 Check and Clean Radiator
Screen and Oil Cooler Fins
••
5 Change Engine Oil and Replace
Oil Filter
†
6 Retorque Front and Rear Wheel
Bolts
first
10
hrs.
•
7 Check Transmission Oil Level
•
8 Replace Hydraulic and
Hydrostatic Oil Filters
first
25
hrs.
•
9 Replace Hydraulic and Hydro-
static Oil
•
10 Replace Air Cleaner Element
†
11 Grease Drive Shaft (both ends)
••
12 Grease FWD Drive Shaft (both
ends)
•
•
13 Grease Front Axle Pivot (front
and rear lube fittings)
•
•
14 Check Oil Level of Front Axle
AND Final Reduction Gear
Cases (both sides)
•
15 Grease Power Steering Cylinder
(both ends)
••
16 Change Oil in Front Axle AND
Final Reduction Gear Cases
(both sides)
•
17 Grease Three Point Lift Shaft
••
18 Change Engine Coolant Ye a r l y
19 Check All Hoses and Hose
Connections
••
20 Check Condition of Fan Belt
•
21 Replace Fan Belt
•
22 Drain Fuel Filter Cup
••
23 Replace Fuel Filter Element
•