Filter
Top Products
23
SECTION 11: MAINTENANCE
LUBRICATION
Daily
• Checkthelevelofhydraulicoilintractorbefore
starting each day’s operation. If necessary, add oil
as recommended in your tractor owner’s manual.
IMPORTANT: When adding oil to the tractor reservoir,
always use hydraulic oil as specified in the tractor
operator’s manual.
• Lubricateaftereveryeighthoursofoperation(See
Figure 30):
- Apply lubrication to the grease fitting in the hub
at the mast end (rearward end) of each boom
arm.
- Apply lubrication to the grease fittings at the
each end of both boom lift cylinders.
- Apply lubrication to the grease fitting in the hub
at the upper end of each bucket cylinder.
- Apply lubrication to the grease fittings in the
outer end of all four pivot pins of the loader
bucket.
GENERAL MAINTENANCE
After every eight hours of operation, check all hard-
wareandtightenwhererequired.
Replace hoses immediately if they are damaged by
a cut or scrape, extruded at the fittings, or leaking.
Hydraulic oil leaks should be repaired promptly to
avoid loss of oil and serious personal injury from
escaping oil.
LUBRICATION
Figure 30