Filter
Top Products
6
SECTION 2: LABELS FOUND ON LOADER
(QTY 2) 777D11290
On Both Sides
777S32188
INSTRUCTIONS
ASSEMBLY FOR FRONT END LOADER
1. PA RK LOADER ON FIRM
LEVEL GROUND.
2. SLOWLY DRIVE THE TRACTOR
CLOSE TO THE LOADER. STOP
AND SET THE PARKING BRAKE.
3. CONNECT COLOR CODED
HYDRAULIC QUICK DISCONNECT
TO LOADER HOSES.
4. USE THE LOWER BOOM
CONTROL TO LOWER MASTS
ONTO RECEIVERS.
5. CONTINUE TO LOWER BOOM
UNTIL ALL WEIGHT IS OFF
THE FRONT TIRES.
6. LOCK LOADER MOUNTING
TUBE INTO RECEIVER WITH
LYNCH PINS.
7.ADD HAIR-PINS TO LYNCH
PINS (IMPORTANT TO PREVENT
LYNCH PIN LOSS ).
DISASSEMBLY FOR FRONT END LOADER
1.PARK TRACTOR ON FIRM
LEVEL GROUND.
2. USE THE LOWER BOOM
CONTROL TO TAKE ALL
WEIGHT OFF OF FRONT TIRES.
3. REMOVE LY NCH PINS FROM
FRONT MOUNT ASSEM
BLY.
4. USE THE RAISE BOOM
CONTROL UNTIL MASTS EXIT
THEIR RECEIVERS.
5. DISCONNECT THE COLOR
CODED HYDRAULIC QUICK
DISCONNECTS.
6. SLOWLY DRIVE AWAY FROM
LOADER.
1. READ AND UNDERSTA ND
OPERATOR'S MANUAL
BEFORE OPERATING.
2. K EEP OTHERS AWAY WHEN
OPERATING LOADER.
3. DO NOT ALLOW CHILDREN
OR UNTRAINED PERSONS
TO OPERATE EQUIPMENT.
4. LOWER LOADER TO GROUND,
STOP ENGINE, SET PARK
BRAKE AND REMOVE KEY BEFORE
LEAVING TRACTOR SEAT.
5. FAILURE TO FOLLOW SAFETY
RULES CAN RESULT IN
SERIOUS INJURY OR DEAT H.
IMPORT ANT
TO PREVENT POSSIBLE
TRANSMISSION DAMAGE, ENGAGE
THE 4WD ONLY WHEN ADDITIONAL
TRACTION IS NEEDED WHILE
OPERATING IN LOOSE SOIL OR ON
SLIPPERY SURFACES (E.G. MUD,
SNOW), OR WHEN DESCENDING A
SLOPE. DISENGAGE THE 4WD
WHEN OPERATING ON FIRM, FLAT
SURFACES OR WHEN OPERATING
ATHIGH SPEEDS.
WARNING
777I22804
UP
DOWN
N
UP &
DUMP
DUMPCURL
FLOAT
READ OPERATORS MANUAL BEFORE OPERATING
UP &
CURL
DOWN &
CURL
12
3
4
DOWN &
DUMP
Model Plate
777D11357
(QTY 2) 777I22850
777D11356
BUCKET LEVEL
REFERENCE POINT
On Both Sides