Filter
Top Products
17. Disengagepowertotheauger/impeller
whensnowthroweristransportedor
not inuse.
18, Useonlyattachmentsandaccessories
approvedbythemanufacturerofthe
snowthrower(suchastirechains,
electricstartkits,etc.).
19. Neveroperatethesnowthrower
withoutgoodvisibilityorlight.Always
be sureof yourfooting,andkeepa
firm holdonthehandles.Walk;never
run.
MAINTENANCE ANDSTORAGE
1. Check shear bolts and other bolts
frequently for proper tightness to be
sure the snow thrower is in safe
working condition.
2. Never store the snow thrower with fuel
in the fuel tank inside a building where
ignition sources are present such as
hot water and space heaters, clothes
dryers, and the like. Allow the engine to
cool before storing in any enclosure.
3. Always refer to operator's manual
instructions for important details if the
snow thrower is to be stored for an
extended period.
4. Maintain or replace safety and instruc
tion labels, as necessary.
5. Run the snow thrower a few minutes
after throwing snow to prevent freeze-
up of the auger/impeller.
A
WARNING: This snow thrower is for
use on sidewalks, driveways and other
ground level surfaces.
Caution should be exercised while using on
steep sloping surfaces. DO NOT USE
SNOW THROWER ON SURFACES
ABOVE GROUND LEVEL such as roofs of
residences, garages, porches or other such
structures or buildings.
Contents of Parts Bag (actual size)
1 - Owner's Manual (not shown)
2 - Parts Bags (not shown)
*Non-Assembly Parts, found
in tool box located on belt cover.
©
1 -Washer, Hvsptlk 1- Nut, 1/2-13 Hexjam
1- Shifter I
*2 - Shear Pins
*2 - Spare Spacers
3 -Hex Nylon Nuts, 5/16-18
1 - Starter Motor Cord lOFt.
4 - Flatwaahers 11/32 In.
_1- Nut, 5/16-18 Reghex
A