Craftsman 486.248381 Snow Blower User Manual


  Open as PDF
of 40
 
14
FIGURE 28 RIGHT SIDE VIEW
INSTALLING HANGER BRACKETS
Forbetterclearance,lowerthetractor'ssuspensionarms
usingtheattachmentliftlever.
STEP 26: (SEE FIGURE 25 or 26)
On Tractors With Foot Rest Brackets
• RemovetheboltandnutthatfastentheL.H.andR.H.
foot rest brackets to the frame.
• AttachtheL.H.HangerBracket(marked"L")tothe
inside of the tractor frame using two 3/8" x 1" carriage
bolts(K)and3/8"angednuts(BB).Boltheadsgoon
inside of tractor frame. Repeat for the R.H. side.
FIGURE 26 LEFT SIDE VIEW
FIGURE 25 LEFT SIDE VIEW
On Tractors Without Foot Rest Brackets
• Findtheemptyholebeneaththefootrest.Attachthe
L.H. Hanger Bracket (marked "L") to the inside of the
frame using a 3/8" x 1" carriage bolt (K) and a 3/8"
angednut(BB).Boltheadgoesoninsideoftractor
frame. Repeat for the R.H. side.
STEP 28: (SEE FIGURE 28)
• Assembleashoulderbolt(P)and3/8"angednut
(BB) to the R.H. side of the tractor frame, using the
rstemptyholetotherearoftheR.H.hangerbracket.
Bolt goes on inside of frame.
FIGURE 27 LEFT SIDE VIEW
INSTALLING SHOULDER BOLTS
STEP 27: (SEE FIGURE 27)
• Removethebolt,washerandnutwhichfastenthe
sway bar bracket to the L.H. side of the tractor frame.
Replacewithashoulderbolt(P)anda3/8"anged
nut (BB). Bolt goes on inside of frame.
BOLT REMOVED
FROM THIS HOLE
SWAY BAR
BRACKET
SHOULDER BOLT (P)
3/8"
FLANGED
NUT (BB)
3/8" x 1"
CARRIAGE
BOLT (K)
3/8" FLANGED
NUT (BB)
L.H. HANGER
BRACKET
SUSPENSION ARM
SHOULDER BOLT (P)
3/8"
FLANGED
NUT (BB)
R.H. HANGER BRACKET
BOLT REMOVED
FROM THIS HOLE
3/8" x 1"
CARRIAGE
BOLT (K)
3/8" FLANGED
NUT (BB)
L.H. HANGER
BRACKET
SUSPENSION ARM
 previous next