Filter
Top Products
15
SECURE
ROPE
2ND LOWER
SUPPORT ROD
LOCK/UNLOCK
LANYARD
• Secure rope around bottom of cart. Use the lanyard to
tighten rope until it rmly secures the cart cover to the
cart. See gure 22.
• Ensure lanyard is locked to keep rope in place. See
gure 22.
NOTE: Cart bag not shown for clarity.
FIGURE 22
1/4" x 3/4"
HEX BOLT
1/4" x 1"
HEX BOLT
1/4"
WASHER
BAG
1/4"
NYLOCK
NUT
1/4"
WASHER
While performing the assembly operations
in gure 21, make sure the cart bag is
between the top angle support and the cart.
FIGURE 21
Place the top angle support and cart bag on top •
of the cart as shown in gure 21. Then, using a
screwdriver or other sharp object, poke holes through
the cart bag for the bolts that will be assembled.
Attach the top angle support and braces to the cart •
using ve 1/4" x 3/4" hex bolts, two 1/4" x 1" hex bolts
through braces, fourteen 5/16" washers (one placed
on each side) and seven 1/4" nylock nuts. DO NOT
TIGHTEN YET. See gure 21.
TIGHTEN• all bolts assembled.
NOTE: Most of cart bag not shown for clarity.