Craftsman 486.242211 Lawn Sweeper User Manual


  Open as PDF
of 20
 
7
STEP 6: (SEE FIGURE 6 AND 7)
If your tractor hitch has 10" to 13" ground clearance
refer to gure 6. If your tractor hitch has 8" to 10"
ground clearance refer to gure 7.
• Assemblethehitchbracketstothehitchtubesusing
two5/16"x2"hexbolts(B)and5/16"nylocknuts(J).
Theboltsshouldstraddlethefronthitchtubebolt.Do
not tighten yet.
• Atthistimetightenthefourboltsfasteningthehitch
tubestothesweeperhousing.Next,tightenthetwobolts
fasteningtheendsofthehitchtubestogether.Finally,
tightenthetwoboltsfasteningthehitchbracketstothe
hitchtubes.
• Assemblethehitchpin(Y),two3/4"hitchspacers(U)
andthe1/8"haircotterpin(M)tothehitchbrackets.
5/16" x 2"
HEX BOLT (B)
5/16" NYLOCK
NUT (J)
3/4" SPACER (U)
HITCH BRACKET
HITCH BRACKET
(STRAIGHT)
1/8" HAIR
COTTER PIN (M)
HITCH PIN (Y)
5/16" x 2"
HEX BOLT (B)
5/16" NYLOCK
NUT (J)
3/4" SPACER (U)
HITCH PIN (Y)
HITCH BRACKET
(STRAIGHT)
1/8" HAIR
COTTER PIN (M)
HITCH BRACKET
FIGURE 6
FIGURE 7
STEP 7: (SEE FIGURE 8)
• Assembletheheightadjustmenthandletotheinside
ofthebracketontheendoftheheightadjustment
tube.Usetwo5/16"x1"hexbolts(E),5/16"at
washers(K)and5/16"nylocknuts(J).Tighten.
• Assemblethegrip(W)ontotheheightadjustment
handle.
5/16" NYLOCK NUT (J)
HEIGHT
ADJUSTMENT
HANDLE
GRIP (W)
5/16" FLAT WASHER (K)
5/16" x 1" HEX BOLT (E)
FIGURE 8
STEP 8: (SEE FIGURE 9)
• Assembleontoa5/16"x1-1/4"hexbolt(D)inthe
orderlisted,a5/16"atwasher(K),thepivotbushing
(S),theheightadjustmentstrapandthespacer
bushing(T).Inserttheboltthroughtheupperpartof
thedoubleholeintheendofthesweeperhousing
andsecureitwitha5/16"nylocknut(J).Tighten.
PIVOT BUSHING (S)
5/16" NYLOCK NUT (J)
SPACER BUSHING (T)
5/16" FLAT WASHER (K)
5/16" x 1-1/4"
HEX BOLT (D)
HEIGHT ADJUSTMENT
STRAP
FIGURE 9
 previous next