Craftsman 486.242211 Lawn Sweeper User Manual


  Open as PDF
of 20
 
5
STEP 2: (SEE FIGURE 2)
• Attachthebrushassemblywiththeredbrushretainer
totherightendofthebrushshaftusingtwo1/4"x
1"hexbolts(G)and1/4"nylocknuts(I).Thebrush
retainermarkedwithredinkmustbeplacedtothe
middle of the sweeper.
FIGURE 1
TOOLS REqUIRED FOR ASSEMBLY
(2)7/16"OpenEndorBoxEndWrenches
(2)1/2"OpenEndorBoxEndWrenches
ASSEMBLY
REMOVE PARTS FROM CARTON
• Toprotectpaintedparts,laythemoncardboardora
mat.
• Removethesweeperhousing,theloosepartsandthe
hardwarepackagefromthecarton.Layouttheparts
andhardwareasshownonpages3and4.
STEP 1: (SEE FIGURE 1)
• Eachbrushassemblyhasonebrushretainer
markedwitheitherredorblackink.Layoutthebrush
assembliesasshownsothatthebrushretainers
markedwithinkareinthemiddlewiththeredoneon
therightandtheblackoneontheleft.
OVERLAP BRISTLES
BRUSH RETAINER
MARKED BLACK
BRUSH RETAINER
MARKED RED
IMPORTANT:Theoverlapbristlesatthebottomofeach
brushhelpsupportthebacksideofthebrushforbetter
sweeper performance. Be sure the sweeper is turned
asshowningures2and3tocorrectlyassemblethe
brushes.
BRUSH RETAINER
MARKED RED
OVERLAP
BRISTLES
1/4" x 1"
HEX BOLT (G)
1/4" NYLOCK NUT (I)
BRUSH RETAINER
MARKED RED
FIGURE 2
 previous next