Filter
Top Products
m
r._i7
_=:
FIGURE 1.
ASSEMBLY INSTRUCTnONS
Flat ---_/t_
Washer [ _ ) ]
5/16" I.D.
HeX Lock
ut 5/16-18
Thread
Hex Bolt
•,,----5/16-18 x 8-3/8" Long
IMPORTANT: This unit is shipped WITHOUT GASO-
LINE or OIL After assembly, see operation section of
this manual for proper fuel and engine oil recommen-
dations.
NOTE: To determine right and left hand sides of your
chipper-shredder, stand behind and face the hopper
(engine is at the front of the unit).
Your chipper-shredder has been completely assem-
bled at the factory, except for the hopper assembly
(hopper hood and upper leaf ramp section have been
sub-assembled), upper guide assembly, chute deflec-
tor and the catcher bag. The hardware pack and safe-
ty glasses are also included in the carton.
The hardware pack contains the parts shown in figure
1 (shown full size).
TOREMOVECHIPPER-SHREDDERFROMCARTON
Cut the corners of the carton Remove all packing
inserts. Roll chipper-shredder out of the carton Make
certain all parts and literature have been removed
before the carton is discarded,
TOOLSREQUIREDFORASSEMBLY
(1) Phillips Screwdriver
(2) 1/2" or Adjustable Wrenches
(2) 7/16" or Adjustable Wrenches
.oxLock.ats
_=VJ V_ _' _ ' 1/4-20 Thread