Filter
Top Products
CUSTOMER RESPONSIBILITIES
VIA1NTENANCE SCHEDULE
sill in dates as you complete
"egular service
Sheck for loose fasten ers
Slean Exterior
Zmpty Water Tank
Clean Basket Filter
Sor_dition Water Tank
:_eplace Ah-fWater Filters
Read and follow the maintenance schedule and the maintenance procedures listed in this
section.
%¢" _'_ Service Dates
X
EMPTYING WATER TANK
• Place container under drain valve, or
have tractor on surface where water can
be drained to.
• Remove drain plug by turning counter-
clockwise.
• Loosen fill cap.
• Allow tank to drain completely.
• Replace drain plug and hand tighten
turning clockwise.
CLEANING BASKET FILTER
• Remove fill cap and remove basket filter.
• Rinse debris from filter with running
water.
• Replace basket filter and fill cap.
CONDITIONING WATER TANK
Conditioning the water tank ensures that the
cooling system will operate at optimal levels
throughout the life of the system. It is sug-
gested that the tank be conditioned at an inter-
val of every 4th filling or once a month; which-
ever comes first.
• Completely drain water tank. (See Emp-
tying Water Tank)
• Fill tank with DRINKING WATER. Be
sure to always fill tank with basket filter in
place.
• Add 5 drops of household bleach to wa-
ter tank.
• Replace cap and hand tighten.
• Run system for 5 minutes with increased
water flow.
• The system is conditioned and ready for
operation.
REPLACING FILTERS
The filters have been designed to provide
optimal system performance by catching any
debris that may enter the supply lines through-
out use. Annual replacement of both the air
and water inline filters ensures the life of your
system.
• Open tractor hood and locate the inline
filters on the water (blue) supply line.
• Cut water (blue) supply line at each end
of filter body.
• Dispose of filter.
• Remove filter from package and orient
directional arrow so that the flow direction
is towards the misting assembly.
(B)
"'%
• Push supply line from power unit over
filter barb near base of arrow (A) until
seated against filter body.
• Push supply line from misting nozzle over
filter barb at arrowhead (B) until seated
against filter body.
• Repeat steps for air (black) supply lines.
]6