Filter
Top Products
20 DR
®
FIELD and BRUSH MOWER
Stopping the Engine
1. Disengage the Blade by pushing DOWN on the Blade Engage/Disengage Switch Knob (Figure 1,
on page 12).
2. Set the Parking Brake.
3. Move the Shift Lever to the N (Neutral) position.
4. Move the Throttle Control to the IDLE position.
5. Turn the Key to the OFF position and remove it for safety.
NOTE: If your machine is equipped with a fuel shut-off valve, close it when transporting or storing the mower.
Obstacle Tips
Dealing with obstacles in the terrain is easy with your new DR FIELD and BRUSH MOWER. The following
section explains how to approach most common obstacles.
THE MOWER ENGINE'S POWER CAN EASILY THROW STONES, STICKS AND OTHER DEBRIS AT GREAT
VELOCITY, WHICH COULD CAUSE PERSONAL INJURY OR PROPERTY DAMAGE. DO NOT RUN THE
MACHINE OVER GRAVEL DRIVEWAYS OR OVER LOOSE STONES OR MULCH WITH THE MOWER BLADE
SPINNING.
• Always check your work area before mowing and remove any debris that might tangle or damage the
machine.
• If you do run into debris and the mower becomes tangled, turn off the engine and disconnect the spark
plug wire(s) before attempting to untangle the machine.