Filter
Top Products
Dispose of fluids and cleaning materials as per any local, state, or federal codes
and regulations. Store oil rags in a covered metal container.
4. Never store fuel or other flammable materials near the Polesaw/Pruner.
5. Do not smoke, or allow sparks, flames, or other sources of ignition around
the Polesaw/Pruner.
6. Keep grounded conductive objects, such as tools, away from exposed, live
electrical parts and connections to avoid sparking or arcing. These events
could ignite fumes or vapors.
7. Do not refill the Fuel Tank while the Engine is running or while the Engine is
still hot. Do not operate the Polesaw/Pruner with known leaks in the fuel system.
8. Use only Engine manufacturer recommended fuel and oil.
MECHANICAL PRECAUTIONS
1. Prior to performing service, maintenance, or cleaning procedures, always
make sure the Power Switch is in its “OFF” position. Allow the Engine
to completely cool. Then, remove the spark plug from the Engine.
2. Do not alter or adjust any part of the Polesaw/Pruner or Engine that is
assembled and supplied by the manufacturer.
3. Always follow and complete scheduled Polesaw/Pruner and Engine
maintenance.
CHEMICAL PRECAUTIONS
1. Avoid contact with hot fuel, oil, exhaust fumes, and solid surfaces.
2. Avoid body contact with fuels, oils, and lubricants used in the Polesaw/
Pruner and Engine. If swallowed, seek medical treatment immediately. Do not
induce vomiting if fuel is swallowed. For skin contact, immediately wash with
soap and water. For eye contact, immediately flush eyes with clean water.
1. Prolonged exposure to high noise levels is hazardous to hearing.
Always wear ANSI approved hearing protection when operating or working
NOISE PRECAUTIONS
SKU 95283 For technical questions, please call 1-800-444-3353 PAGE 7