Filter
Top Products
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front cover.
Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES AND PRECAUTIONS
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1. Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Power tools create
SKU 95283 For technical questions, please call 1-800-444-3353 PAGE 2
The Emission Control System for this product’s engine is warranted for standards set by the U.S.
Environmental Protection Agency. For warranty information, refer to the last pages of this manual.
This product requires a 50:1 ratio of fuel and 2-cycle oil to be added to its fuel tank before starting.
Attempting to start the Engine with an improper fuel mix, low or no fuel mix WILL ruin the Engine and
void the warranty.
The Engine’s Carburetor may need to be adjusted by a qualified mechanic for efficient high-altitude
use.
Item Description
Engine Specifications 1 HP / 26cc / Single Cylinder / 2-Stroke
Fuel Required: 50:1 Unleaded Fuel & 2 Cycle Oil Mixture
Fuel Tank Capacity: 0.2 Gallon
Noise Level: 102 dB @ 3 Feet
Drive Type Lever Operated Clutch System
Chain/Bar Type Oregon Chain & Bar / Double Guard / Low Kickback
3/8” Pitch with 39 Drive Link Count
Chain Oiler Built Into Base of Chain Head Attachment
Recommended Chain Oil S.A.E. 30 (Below 34° Fahrenheit) / S.A.E. 40 (Above 75° Fahrenheit )
Pole Height 8 Feet (Including 10” Bar)
Construction Main Poles: Steel Tubing
Chain Bar: Stamped and Formed Steel
Chain: Machined High Carbon Steel
Guards/Trim: Multi-Colored High Impact Plastic
Spark Plug NHSP L8RTF, Gap = 0.5~0.7mm (.0197~.0275inch)
Net Weight 12.13 Pounds
®