Filter
Top Products
COLORado™ 6 User Manual 16 7/1/2009 4:46 PM
SET
UP
DOWN
EXIT
Setting the DMX address
Each fixture requires a start address from 1 ~ 512. A fixture requiring one or more channels for
control begins to read the data on the channel indicated by the start address. For example, a fixture
that occupies or uses 7 channels of DMX and was addressed to start on DMX channel 100, would
read data from channels: 100, 101, 102, 103, 104, 105 and 106. Choose start addresses so that the
channels used do not overlap and note the start address selected for future reference. The
COLORado™ 6 uses 12 channels in its Stage 1 personality. If this is your first time using DMX, we
recommend reading the DMX Primer in the “Appendix” Section.
Control Panel Functions
All fixture functions and settings are accessible via the built in control panel.
BUTTON
FUNCTION
SET
Enables the currently displayed menu or sets the currently selected value in to the
selected function
UP
Navigates upwards through the menu list and increases the numeric value when in
a function
DOWN
Navigates downwards through the menu list and decreases the numeric value when
in a function
EXIT
Exits from the current menu or function