Filter
Top Products
Operation
-16- Legend 300E Spot User Manual Rev. 01g
Fixture Information
From the Main Menu, highlight Fixture Information and press <ENTER>
(a new menu
with the fixture information will open).
Fixture Operation Timer
1) Highlight Fixture Use Time (the accumulated fixture’s operation time will show).
You cannot modify or reset the fixture operation timer.
Lamp Operation Timer
1) Highlight Lamp On Time (the accumulated lamp’s operation time will show).
2) To reset the lamp operation timer, press <ENTER> (a pop up window will open).
a) Select Reset Time to reset the timer or Exit to exit without resetting.
b) Accept the selected option.
Firmware Version
1) Highlight Firmware Version.
2) To see the firmware versions installed, press <ENTER> (a sub-menu will open)
a) The display will show the current firmware version for each of the four CPU
boards (A through D) in the fixture.
b) Return to the previous menu.
Reset Functions
From the Main Menu, highlight Reset and press <ENTER> (a new menu with the
resettable attributes will open).
You can leave this sub-menu at any time by pressing <MENU>.
Pan/Tilt Reset
1) Highlight Pan/Tilt and press <ENTER> (a pop up window will open).
a) Select YES to reset the pan and tilt movements to their home positions.
b) Accept the selected option.
Color/CMY Reset
1) Highlight Color/CMY and press <ENTER> (a pop up window will open).
a) Select YES to reset the color wheel and the CMY filters to their home positions.
b) Accept the selected option.
Gobo Reset
1) Highlight Gobo and press <ENTER> (a pop up window will open).
a) Select YES to reset the gobo wheel to its home position.
b) Accept the selected option.
Shutter/Dimmer Reset
1) Highlight Shutter/Dimmer and press <ENTER> (a pop up window will open).
a) Select YES to reset the shutter and dimmer to their home positions.
b) Accept the selected option.
Focus/Zoom/Prism/Frost
Reset
1) Highlight Focus/Zoom/Prism/Frost and press <ENTER> (a pop up window will
open).
a) Select YES to reset the focus, the zoom, the prism, and the frost to their home
positions.
b) Accept the selected option.
Iris/Flatb
1) Highlight Iris//Flatb and press <ENTER> (a pop up window will open).
a) Select YES to reset the iris and flatb to their home positions.
b) Accept the selected option.
Reset All
1) Highlight All and press <ENTER> (a pop up window will open).
a) Select YES to reset all moving optical parts and the moving head to their home
positions.
b) Accept the selected option.