Filter
Top Products
8
Step 9a. Remove any remaining packaging material from the
Candelier fi xture. Carefully unwrap the plastic packaging from
the cardboard case of bulbs. Keep the case on a hard surface,
for stability.
Step 9b. Remove each bulb carefully, handling it by the white
plastic base, as shown. There are 53 bulbs provided. (Five
bulbs are “extra”.)
Step 9c. With the Candelier hanging from the ceiling, install
the fl icker bulbs. Beginning with the inner row in the circle,
and moving out in a circular pattern, screw individual fl icker
bulbs into each socket carefully. Do not bump bulbs together
or brush against them, as it may damage the fragile nature
of the wiring system. Use extreme caution when handling
fl icker bulbs.
NOTE: The Candelier fl icker bulbs are extremely fragile,
and should be handled with care.
Step 8a. To install or replace the halogen bulbs, fi rst
remove the bulb covers.
• Loosen the round knurled nuts.
• Slide out the plastic halogen bulb covers (both covers
are the same part; they fi t together).
Step 8b. Carefully remove halogen bulbs from packaging.
There are 8 halogen bulbs provided.
Step 8c. Locate the halogen sockets inside the wiring
cavities. Plug each halogen bulb into a socket, as shown.
Step 8d. Hold the halogen bulb carefully by the socket.
Press the bulb into the bulb casing with gentle pressure.
Step 8e. Reverse instructions in Step 8a to re-install the
halogen bulb covers.
HALOGEN BULB INSTALLATION
REMOVING FLICKER BULBS FROM PACKAGING
Halogen Bulb
Flicker Bulbs
Flicker Bulb
(installed)