Filter
Top Products
10
RECEIVER DISPLAY GUIDE
A) RF (RADIO FREQUENCY) RECEPTION STATUS
This icon shows the connection status between the Receiver unit and the USB Transmitter.
There are three basic status indications:
The Receiver is successfully synchronized to the USB Transmitter and receiving
weather data from it periodically.
A ashing icon indicates that the Receiver is searching for the RF signal from
the USB Transmitter.
No vertical bars indicates that the RF signal from the USB Transmitter is not
being received or is too weak.
B) NETWORK TIME (Auto-synchronized clock)
The clock on the main unit is synchronized to the Internet network time automatically and is
adjusted for optimal accuracy. Press UNITS on the back of the Receiver until you see “Hour
Format Setting” and use the + / - buttons to select 12 or 24 Hr time format.
NOTE: If your PC is not connected to the internet for a long period of time, the clock display
may not be accurate. Once you reconnect to the internet, exit and then relaunch the HuntFXi
software, then click “Send to Receiver”.
C) ALARM ON INDICATOR
Icon appears conrming the alarm has been set by pressing ALARM.
A
B
C
D
E
F
G
M
H
J
K
L
I