Filter
Top Products
DEALER PREPARATION CHECK LIST
SM60 ROTARY CUTTER
BEFORE DELIVERING MACHINE — The following check list should be completed.
Use the Operator’s Manual as a guide.
r 1. Assembled completed.
r 2. Gearbox filled with oil.
r 3. All fittings lubricated.
r 4. All shields in place and in good condition.
r 5. All fasteners torqued to specifications given in Torque Chart.
r 6. Slip clutches have been checked for proper operation.
r 7. All decals in place and readable. (See Decal Page)
r 8. Overall condition good (i.e. paint, welds)
r 9. Operators manual has been delivered to owner and he has been instructed
on the safe and proper use of the cutter.
r 10. Purchaser or dealer elects to delete deflectors. (front belting, rear bands, front
and rear chains)
WARNING
For Non-Agricultural use, OSHA, ASAE, SAE and ANSI
standards require the use of Chain Guards or other protective
guards at all times. Bush Hog strongly recommends the use
of such guards for Agricultural uses as well, to reduce the risk
of property damage, serious bodily injury or even death from
objects thrown out by or from contact with the cutting blades.
Dealer’s Signature
Purchaser’s Signature
THIS CHECKLIST TO REMAIN IN OWNER’S MANUAL
It is the responsibility of the dealer to complete the procedures listed
above before delivery of this implement to the customer.
3