Filter
Top Products
DEALER PREPARATION CHECK LIST
GT 48 Rotary Cutter
BEFORE DELIVERING MACHINE — The following check list should be completed.
Use the Operator’s Manual as a guide.
ASSEMBL
Y
❒ 1. Axle assembly
❒ 2. Tongue assembly
❒ 3. Throttle assembly
ENGINE SER
VICE (Refer to Engine Owner’s Manual)
❒ 1. Oil reservoir filled
❒ 2. Gas tank filled
GENERAL
❒ 1. All shields in place
❒ 2. All safety decals legible (If damaged, Bush Hog will
furnish free upon request)
❒ 3. All bolts tight (Including blade bolts)
❒ 4
.
Machine operates properly
❐ 5. Overall condition good
❒ 6
.
Operator’s Manual and Engine Manual was delivered to owner, and he has
been instructed on the safe and proper use of cutter.
❒ 7. Kill switch cord included
Dealer’s
Signature
Purchaser’s
Signature
THIS CHECKLIST TO REMAIN IN OWNER’S MANUAL
It is the responsibility of the dealer to complete the procedures listed
above before delivery of this implement to the customer.
3