Filter
Top Products
Installing the Driver & Software
22
STEP 2
Macintosh
®
Macintosh
®
Network
4
For Network Interface Users
For Mac OS
®
X 10.2.4 or greater
Important
Make sure that you have finished the
instructions from step 1 Setting Up the
Machine on pages 4 through 9.
1 Connect the network interface cable to the
machine, and then connect it to your network.
Note
Make sure that the machine is turned on by
connecting the power cord.
2 Turn on your Macintosh
®
.
3 Put the supplied CD-ROM into your CD-ROM
drive.
4 Double-click the Start Here OSX icon to install.
Follow the on-screen instructions.
Please wait, it will take a few seconds for the
software to install. After the installation, click
Restart to finish installing the software.
Note
Please see the Network User’s Guide on the CD-
ROM to install the PS driver.