Filter
Top Products
2424
www.simplicitymfg.com | www.snapper.com
Lubrication
Lubricate the unit at the following lubrication points
shown in Figures 14 through 17.
Grease:
• front caster wheel axles
• front caster yokes
• roller straps (deck lift pivots)
• mower deck idler arm pivot
• mower deck arbors
Use grease fittings when present. Disassemble parts
to apply grease to moving parts when grease fittings
are not installed.
Not all greases are compatible. Use automotive-type
lithium grease.
Oil:
• control handle pivots
• discharge chute hinge
Generally, all moving metal parts should be oiled
where contact is made with other parts. Keep oil
and grease off belts and pulleys. Remember to wipe
fittings and surfaces clean both before and after
lubrication.
Figure 14. Lubricate the Rider
Lube Idler
Arm Pivot
Regular Maintenance
Figure 17. Lubricate Idler Arm Pivot
Figure 16. Arbor Lubrication - 44”, 50” & 54” Models
Figure 15. Arbor Lubrication - 46” Models
Not for
Reproduction