Filter
Top Products
7
Q
UICK-START DEMONSTRATION
I. Supplies Needed
• A Nail • A Quarter
• A Pull-Tab from a beverage can • A Zinc Penny (dated after 1982)
II. Position the Detector
a. Place the detector on a
table, with the searchcoil
hanging over the edge.
(or better, have a friend
hold the detector, with
the coil off the ground)
b. Keep the searchcoil away
from walls, floors, and
metal objects.
c. Remove watches, rings and other jewelry or metal objects from
hands and wrists.
d. Turn off appliances or lights that cause electromagnetic
interference.
e. Pivot the searchcoil back
toward the detector body.
III. Power Up
Press the POWER touchpad.
IV. Wave each Object over the
Searchcoil
a.Notice a different tone for each object.
Bass Tone: Nail
Low Tone: Pull-Tab
Medium Tone: Zinc Penny
High Tone: Quarter
b.Motion is required. Objects must be in motion over the
searchcoil to be detected.
V. Press the DISC A-M touchpad
The detector will beep twice
and an “R” will appear under
the iron indicator.
Quick-Start Demo continued
on next page