Filter
Top Products
5
SECTION 3: FINDING YOUR MODEL NUMBER
This Operator’s Manual is an important part of your new chipper-shredder. It will help you assemble, prepare
and maintain your chipper-shredder. Please read and understand what it says.
Before you prepare your chipper-shredder for its first use, please locate the model plate and copy the
information from it in this Operator’s Manual. The information on the model plate is very important if you need
help from your dealer or the MTD Customer Support Department.
• Every chipper shredder has a model plate. You can locate it by standing behind the unit in the
operating position and looking down at the frame next to the engine.
• The model plate will look like this.
SECTION 4: CALLING CUSTOMER SUPPORT
If you are having difficulty assembling this product or if you have any question regarding the controls,
operation or maintenance of this chipper shredder, please call the Customer Support Department. You can
reach them by calling:
1-800-800-7310
Before you call, make sure that you have both your model and serial number ready. By having the model
and serial number ready, you help the Customer Support Representative give you faster service. To find
your units model and serial number, see SECTION 3: FINDING YOUR MODEL NUMBER.
SECTION 5: UNPACKING INSTRUCTIONS
REMOVE UNIT FROM CARTON
• Remove staples, break glue on top flaps, or cut tape at carton end and peel along top flap to open
carton.
• Remove loose parts included with unit (i.e., owner’s manual, etc.).
• Cut along dotted lines and lay carton down flat.
• Remove packing material.
• Roll or slide unit out of carton. Check carton thoroughly for loose parts.
MTD PRODUCTS INC
CLEVELAND, OHIO 44136
XXX-X-XXX-X-XXX XXXXXXXXXXX
This is where your model number will be.
This is where your serial number will be.
Copy the model number here:
Copy the serial number here: