Filter
Top Products
ASSEMBLY
TM60/72/84/100 02/11 Assembly Section 3-3
© 2011 Alamo Group Inc.
ASSEMBLY
A-FRAME ATTACHMENT FOR TM60-72-84
Attach the rear brace bars (1) to the rear of the deck with 5/8 x 2 bolts(21), flatwasher(23), bushing(15) and 5/8
locknut (18). Insert bar (5) between double lugs on deck and pin in place using pin (10) and cotter pin (16), in
hole “D”. Attach A-frame bars (4) to end holes in bar (5) using hitch pin (12), flatwasher (24), bushing (9),
lockwasher, and 7/8” nut. Insert bushing (13) between upper end of A-frame bars (4). Install flatwasher (23)
onto 5/8 x 5 bolt (22) and insert through link bar (3) through bushing (13) and link bar (3) on side and install 5/8
locknut (18). Insert 5/8 x 2 1/2 (17) bolt through hole “C” in rear brace bar (1) insert two bushings (18) then
through opposite rear brace bar (1) and 5/8 locknut (18). Insert washer (23) then bushing (15) on 5/8 x 2 1/2
bolt (17). Insert bolt through top hole on rear brace bar (1) and through hole “A” on link bar (3) then through
opposite rear brace bar (1), bushing (15), flatwasher (23) and 5/8 locknut (18). Inset 5/8 x 2-1/2 bolt (17)
through bushing (15), link bar (3) hole “B” another bushing (15) then 5/8 lock nut (18). Insert pin (11) through
top holes in A-frame bar (4) and lock with lynch pin (14). Insert bushing (6) into hitch pin (12). Lock into place
using pin (7). If A-frame needs to be moved out, move holes A to E, B to F, and D to G. See Figure Asm-R-
0354_B.