Filter
Top Products
OPERATION
TM60/72/84/100 02/11 Operation Section 4-16
© 2011 Alamo Group Inc.
OPERATION
The operator’s manual and safety signs affixed on
the unit contain important instructions on the safe
and proper use of the equipment. Maintain these
important safety features on the implement in good
condition to ensure the information is available to
the operator at all times.
• Ensure the manual canister is secured to the
equipment with the operator’s manual inside.
• Ensure all safety signs are in place and legible.
Replace missing, damaged, and illegible
decals. OPS-U- 0011
• Ensure the axle arm weldment bolts are
properly installed and tightened.
• Ensure the snapper pin is installed correctly on
the fork and wheel assembly.
• Inspect all bolts and screws and tighten to the
recommended torque. OPS-R-0063_A
• Inspect the condition of the drive belts.
• Ensure the driveline shield and drive belt
shields are in place and in good repair.
• Ensure the tractor PTO master shield is in
place, lowered and in good condition. OPS-R-
0064_C