Filter
Top Products
MAINTENANCE
TM60/72/84/100 02/11 Maintenance Section 5-3
© 2011 Alamo Group Inc.
MAINTENANCE
GEARBOX
The Gearbox has been filled with lubricant prior to shipment. However, you should check the oil level before
operating, and frequently thereafter.
The gearbox should not require additional lubricant unless the box is cracked or a seal is leaking. It is
recommended that the oil level Dipstick/Breather plug be removed after every 10 hours of operation and add
oil if needed. Mnt-R-0189.
Recommended lubricant is Multi-Purpose Gear Oil P/N 00786250. Gearbox capacity is 1 Quart.
NOTE: Overfilling the Gearbox will cause pressure to build up and cause Oil Seals to leak.
ATTENTION: If the Gearbox suddenly starts making an unusual noise, stop at once, check for leaks, and refill
Gearbox as required.
GAUGE WHEEL ASSEMBLIES
Gauge wheels are equipped with bushings
which require grease daily. Grease Fittings
are provided in the Wheel Hub and Gauge
Wheel Pivot. Grease after 10 hours of use.
Mnt-R-0060.