OPERATION
TM60/72/84/100 02/11 Operation Section 4-34
© 2011 Alamo Group Inc.
OPERATION
Lift Mower-To disconnect the mower, first extend
the tractor 3-point hitch top link to remove tension
on the top link hitch pin. When the pin is loose and
easy to rotate, remove the pin from the mower.
Next remove both lower lift arms.
After disconnecting the hitch points, remove the
mower driveline from the tractor PTO shaft. Lay
the driveline down carefully to avoid damaging the
driveline or its shield. Do not let the driveline fall
into mud or dirt, which can contaminate the
bearing and shorten the life of the driveline. OPS-
R-0031_E