Filter
Top Products
9
w ww.b is se ll .c om 8 00 .2 37 .7 69 1
Maintenance and care
Empty the dirt container as soon as the dirt reaches
the “full” line on the side of the container.
1. Unplug the vacuum from electrical outlet.
2. The foam motor filter protects the motor
from dirt particles. It is located in the slide
out tray underneath the dirt container. If the
filter becomes dirty, pull out the tray, lift out
the foam filter pad and clean it.
NOTE: The foam motor filter may be hand
washed in cold water with mild detergent.
Rinse well and air dry thoroughly before
replacing.
3. The HEPA media filter assists in the filtration
process to return clean air to the room. It is
located beneath the pre-motor filter in the
slide out tray housed underneath the dirt
container. If the filter becomes dirty, remove
the tray, remove and replace the HEPA media
filter.
NOTE: The HEPA media filter is white and
pleated. This filter is not washable and
must be replaced when it becomes dirty
Cleaning the foam motor and HEPA media filter
2
WARNING:
Do not operate cleaner
with damp or wet
filters or without all
filters in place.
Foam-motor
Filter
Filter (under
foam motor
filter)