Bissell 13H8 Blower User Manual


 
Vacuum cleaner won’t turn on
Possible causes Remedies
1. Power cord not plugged in 1. Check electrical plug
2. Blown fuse/tripped breaker in home 2. Check/replace fuse or reset breaker
3. Damaged power cord 3. Unplug, check for damage, have cord
replaced at an authorized service center
if necessary
Vacuum cleaner won’t pick up dirt
Possible causes Remedies
1. Hose not attached to suction opening 1. Grasp quick reach handle and firmly push
hose wand onto the suction opening
2. Crack or hole in hose 2. Check hose and replace if needed
3. Broken or worn drive belt 3. Replace drive belt, see page 11
4. Rotating floor brush bristles worn 4. Replace brush
5. Rotating floor brush jammed 5. Remove brush and clean debris from brush ends
6. Clog in vacuum 6. Follow instructions on page 12 for clearing clogs
7. Dirt container full 7. Empty dirt container
8. Dirt container or upper tank not installed properly 8. Position correctly and lock in place
9. Filters are dirty 9. Check and clean foam motor and HEPA
media filters, see page 9
Visible dirt escaping from cleaner
Possible causes Remedies
1. Dirt container full 1. Empty dirt container
2. Filters missing or installed incorrectly 2. Check foam motor and filters for correct
installation
3. Dirt container installed incorrectly 3. Pull out and re-insert dirt container correctly
Other maintenance or service not included in the manual should be performed by an
authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.
For any questions or concerns, BISSELL is happy to be of service.
Contact us directly at 1-800-237-7691.
13
w ww.b is se ll .c om 8 00 .2 37 .7 69 1
Troubleshooting
WARNING:
To reduce the risk of electric shock,
turn power OFF and disconnect
polarized plug from electrical outlet
before performing maintenance or
troubleshooting.