Filter
Top Products
8
w ww.b is se ll .c om 8 00 .2 37 .7 69 1
Maximize your cleaning performance
To maximize your cleaning performance
and extend the life of your vacuum, it is very
important that you empty your dirt container
and check and clean your filters frequently.
Perform the following maintenance steps
1.
Empty the dirt container when the dirt
reaches the “full” line on the dirt container,
or more frequently, to prevent overfills. For
best performance, empty after each use.
2. Check the foam motor filter and the HEPA
media filter at least once a month, clean or
replace as needed.
3. The HEPA media filter should be replaced if
machine performance is noticeable declin-
ing. More or less frequent replacing may
be required based on individual vacuuming
habits and types of debris picked up.
Emptying dirt container
The dirt container should be emptied before the
dirt reaches the “full” line on the container.
1. Unplug the vacuum from electrical outlet.
2. Slide the Lock ‘n Seal lever to the “unlock”
position.
3. Grasp handle and pull the dirt container
straight out to remove from the vacuum.
4. Empty dirt into garbage container.
NOTE: Emptying the dirt container after
every use will help prevent over filling and
ensure that the vacuum is ready to go the
next time you clean.
Maintenance and care
3
Tip:
For maximum cleaning
performance, check
and clean or replace all
filters as suggested.
WARNING:
To reduce the risk of
electric shock, turn
power switch OFF and
disconnect polarized
plug from electrical outlet
before performing
maintenance or
troubleshooting checks.