Filter
Top Products
370310 F112003A
6
ENGINE : Gasoline, HONDA GX 160 K1
ENGINE CAPACITY : 5.5 hp (4.0 kW)
CUTTING WIDTH : 12” (30 cm)
CUTTING HEIGHT : adjustable up to 35 mm
SPEED GEARS : 1 forward gear - 1 reverse gear
TRANSMISSION : mechanical
GEARS : in oil bath
START : recoil
HEIGHT-ADJUSTABLE HANDLEBARS
TIRES : front tires = GARDEN 3.00-4
rear tires = GARDEN 4.10/3.50-4
DIMENSIONS L x W x H (mm) : 780 x 420 x 610 mm
WEIGHT (kg) : 73
ACOUSTIC PRESSURE, measured according to
DIR.98/37/EC :86,2 dBA
ACOUSTIC POWER, measured according to
ISO 374 : LWA 97,0 dBA
VIBRATION LEVEL TRANSMITTED TO THE HANDLEBAR
( EN 1033) AW =
7,8 m/s
2
Environmental conditions
Unless otherwise stated at the time of ordering it is understood that the machine is
to work normally in the environmental conditions covered by the following points.
Environmental conditions other than those described may cause mechanical
breakage resulting in the creation of dangerous situations for persons.
A
LTITUDE
The altitude of the place in which the machine is to be used must not exceed 1500
m above sea level.
T
EMPERATURE
Minimum ambient temperature: -5°C
Maximum ambient temperature: +50°C
A
TMOSPHERIC
C
ONDITIONS
The electrical equipment will function correctly in atmospheric conditions with a
relative humidity up to 50% at a temperature of 40°C and at 90% with a tempera-
ture up to 20°C (without condensate).
A
TMOSPHERE WITH RISK OF EXPLOSION AND
/
OR FIRE
The standard machine herein described is not designed to work in explosive at-
mospheres or in those with risk of fire.
4. L
IFTING AND
T
RANSPORTATION