Filter
Top Products
370310 F112003A
11
6. A
SSEMBLY INSTRUCTIONS FOR THE HANDLEBARS AND END
PART OF THE CUTTING HEIGHT ADJUSTMENT LEVER
The sod cutter is delivered with the handlebars and the end part of the cutting
height adjustment lever disassembled. Remove the cardboard packaging (to be
disposed of in an appropriate manner, in accordance with current regulations in
force).
To assemble proceed as follows :
-Lift the handlebar (Fig. 3 Rif. C) and insert it in the supports shown in Fig. 3 rif. E.
Select the required cutting height and secure the setting using the screws provided
(Fig. 3 ref. D).
- Fit the end part of the cutting height adjustment lever (Fig. 3 Ref. A) into its
relative support (Fig. 3 ref. F) and secure using the screw provided (Fig. 3 Ref.B).
Fig. 3
Before switching on ensure that the machine has been fully assembled cor-
rectly.