Filter
Top Products
370310 F112003A
16
10. D
ESCRIPTION OF THE SAFETY AND GUARD SYSTEMS
WARNING
The safety devices must never be tampered with. It is necessary to understand how they
work and safeguard their efficiency and correct operation. In the instance of doubt, prob-
lems or malfunction contact your dealer.
FORWARD CONTROL AND BLADE MOVEMENT LEVERS
When released both of these levers instantly disengage the transmission con-
nected to them.
In this way they act as safety devices.
In the instance of difficulty or sudden emergency, the quick release of these levers
will return them to their standard position (raised).
COVER
The cover ( Fig. 1 point F) partially protects the machine from any projected objects
and contact with the moving blade. Use of the machine without the said cover is
strictly probhited.
The cover should only be removed when replacing belts with the machine switched
off.
11. O
PERATIONS TO BE CARRIED OUT BEFORE SWITCHING ON
Position the sod cutter outdoors on sufficiently firm, flat soil. Read the instructions
provided by the engine manufacturer in the relative manual and follow them care-
fully to prevent situations arising, which may endanger either persons or the ma-
chine
WARNING. NEW MACHINES STRAIGHT FROM THE FACTORY DO NOT
HAVE ANY ENGINE OIL!
Then check:
- The state of the blade by inspecting them;
- That all the screws are tightened, particularly those securing the blade;
- That the guards and safety devices are securely tightened.
- Before switching on the sod cutter make sure that there are no persons in the vi-
cinity.
- During operation do not allow persons near the machine, especially children. The
operator is responsible for any harm done persons in the working area of the ma-
chine.
Oil recommendations
The engine is supplied without oil. Before starting up the engine fill with oil and
check the oil level with the engine in a horizontal position. Do not overfill.
Use of high-grade detergent oil is recommended (refer to the enclosed engine
manual).
Fuel recommendations
Use of fresh, clean lead-free petrol is advised.
WARNING. IT IS ADVISABLE TO CONSULT THE ENGINE MANUAL BEFORE
SWITCHING ON THE MACHINE.