Filter
Top Products
370310 F112003A
28
21. T
ROUBLESHOOTING
The following table illustrates some problems which may arise during operation.
FAULT CAUSE ACTION
Belt slips 1. Belt tension inadequate
2. Too great a working depth
3. Belt worn
1. Adjust the belt tension
2. Reduce the working depth
3. Replace belt
Machine vibrates excessively 1. Belt damaged
2. Blade bent or broken
1. Replace belt
2. Replace blade
Engine overloads during work
operations
1. Engine speed too low.
2. Blade worn
3. Forward speed too high
4. Too great a working depth
1. Accelerate to maximum
2. Replace blade
3. Decrease the forward
speed
4. Reduce the working depth