Filter
Top Products
23
Step 10
BK23
Screw Driver Holder (1)
1Fasten the mid wall frame across
the middle of the rear wall using eight
bolts and nuts.
2Position a shelf inside mid wall
frame and slide to the end of building.
Fasten using bolts and nuts through
panels.
Repeat Step 2 for the
opposite shelf.
3Install remaining two shelves
above the first two at the holes pro-
vided, using bolts and nuts.
4Fasten the track tool holder across
the upper rear wall using eight screws
from the outside.
● Parts Needed For ●
Shelving/Mid Frame/Track
●●
●●
● 9431 Mid Wall Frame (one)
●●
●●
● 9454 Shelf (four)
●●
●●
● 9522 Track Tool Holder (one)
Tool Hooks slide along track
to any desired position.
Keeps rakes, shovels, brooms
and much more in a safe and
accessible location.
The Screw Driver Holder is
engineered for all types of
hand tools such as
screwdrivers and pliers. A
total of seven hand tools may
be stored.
66148 Cap Protector
Install Cap Protectors to
the ends of the Tool Hooks
and Screw Driver Holder.
Tool Hook (5)
9522
9454
9454
9454
9454
Nut
9431
Bolt
Screw