Filter
Top Products
GB - 4
SAFETY DECALS AND LOCATIONS
ALWAYS replace missing or damaged Safety Decals.
Refer to figures below for Safety Decal locations.
1. WARNING!
2. DANGER!
3. DANGER!
SAFETY RULES
Read, understand, and follow all safety practices in
Owner/Operator Manual before beginning assembly or
operating. Failure to follow instructions could result in
personal injury and/or damage to unit.
ALWAYS remove key and/or wire from spark plug
before assembly, maintenance or service.
Unintentional engine start up can cause death or
serious injury.
Complete a walk around inspection of unit and work
area to understand:
• Work area • Your unit • All safety decals
Read Owner/Operator Manual.
Keep people away from unit while
operating. Keep children out of work
area and under watchful care of a
responsible adult.
Never direct discharge towards persons
or property that may be injured or
damaged by thrown objects.
08000134
OS7016
1
2
3
Figure 2
921002, 003, 004
OS7017
1
2
3
Figure 3
921001
OL1801
OL4370
OL0910
Stop engine, remove key, read manual
before making any repairs or
adjustments.
Wear appropriate hearing protection.
ONLY use clean-out tool to clear
blockages. NEVER use your hands.
ROTATING PARTS! ONLY use clean-out
tool to clear blockages. NEVER use your
hands. High speed impeller rotates
below discharge opening. Wait for all
moving parts to stop before removing
clogs or servicing.
ROTATING PARTS.
Keep clear of auger while engine is
running.
• Read Operator’s Manual.
• Allow operation only by properly
trained adult, never children.
• Stop engine and remove ignition
key prior to leaving the operator’s
position for any reason.
• Keep all controls, guards and
safety devices properly serviced
and functional.
• Never direct discharge towards
persons or property that may be
injured or damaged by thrown
objects.
OL4010
OL4690
OS6610
OS2080