Filter
Top Products
GB - 15
Discharge Chute Control (921002, 003, 004)
IMPORTANT: If chute does not stay in set position,
adjust as directed in SERVICE AND ADJUSTMENTS
on page 21, or repair before operation.
Rotate the Chute with Discharge Chute Control.
IMPORTANT: DO NOT force frozen chute controls. If
frozen, take to warm place until controls are free.
Discharge Chute Crank (921001)
IMPORTANT: If chute does not stay in set position,
adjust as directed in SERVICE AND ADJUSTMENTS
on page 21, or repair before operation.
Rotate the Chute with Discharge Chute Crank.
IMPORTANT: DO NOT force frozen chute controls. If
frozen, take to warm place until controls are free.
Heated Handles (921003)
Turn the heated handles switch to the
ON (1) position to activate. Turn the
switch to the OFF (2) position to
deactivate.
Remote Wheel Lock (921002)
Squeeze and release the remote wheel lock to lock the
left wheel for better traction when throwing snow or to
unlock the left wheel for easier steering.
NOTE: The wheel lock will not release when under
load. Do not unlock the wheel while turning. If the
wheel lock will not release, turn the unit slightly left or
right to relieve axle load and release the axle lock.
If remote wheel lock does not lock or unlock properly,
adjust or repair before operation (see Remote Wheel
Lock (921002) on page 21).
Axle Lock Pin (921001)
(Figure 19)
Use the axle lock pin to lock or unlock the right or left
wheel. Lock both wheels to increase traction; unlock
one wheel to allow for easier turning of the unit.
NOTE: Unit will not drive with both wheels unlocked.
Scraper Blade
The scraper blade allows the back of the housing to
keep better contact with the surface being cleared. It
also prevents damage to the housing from normal
wear.
IMPORTANT: DO NOT allow Scraper Blade to wear
too far or Auger/Impeller housing will become
damaged.
Runners
The runners control the distance between the scraper
blade and the ground. Adjust runners equally to keep
blade level with the ground. Refer to Pre-Start on
page 16 for recommended settings.
Figure 17
OS7105
921002, 003, 004
Figure 18
OS7106
921001
OS1950
1
2
Figure 19
Wheel Unlocked
Wheel Locked
Axle Lock Pin
921001
OS6000