Filter
Top Products
EN - 40
Unit throws
snow poorly
or does not
throw snow.
1. Shear bolts broken.
2. Attachment clutch/brake
not adjusted properly.
3. Impeller is frozen in
place.
4. Ice or debris is
obstructing auger.
5. Attachment drive belt
slipping, worn or
damaged.
1. Replace shear bolts (see Shear
Bolts on page 28).
2. Adjust attachment clutch/brake
(see Attachment Clutch/Brake
Adjustment on page 30).
3. Move unit to a warm place to
thaw.
4. With the engine off and auger
disengaged, check for
obstructions and remove.
5. Adjust or replace attachment
belts. To adjust belts see
Attachment Clutch/Brake
Adjustment on page 30. To
replace belts see Attachment
Drive Belt Replacement on
page 33.
Unit runs
briefly then
stops.
1. A build up of fumes in the
fuel tank is creating too
much pressure in the fuel
tank.
1. Carefully loosen the cap to the
fuel tank.
TROUBLESHOOTING
PROBLEM PROBABLE CAUSE CORRECTION