Filter
Top Products
24 AQUATIC INDUSTRIES, INC.
MAINTENANCE AND CARE
Owners of fill and drain whirlpool bathtubs need to know basic information concerning water quality: how it
affects performance and enjoyment of the operation of their tubs, and steps that can be taken by the owner
to correct related problems. Important issues are the microbiological and chemical quality of the water.
1. MICROBIOLOGICAL QUALITY
Microbes are present in water supplied by individual wells or water systems and even in the air around us. These
microbes are usually in amounts below what is noticeable. Microbes from the water or air or from a bathers
body may settle on wetted surfaces such as a whirlpool bathtub’s surface or piping systems where they can
grow in numbers where we can notice them. With regards to whirlpool bathtubs, brown/black fungi/mold or
pigmented (colored) bacteria can be noted.
Fungi/Mold- Fungi and mold are always present. The levels are usually such that we do not notice them. When
moisture and temperature are sufficient, the organisms will grow to levels that we may smell and/or see. The
best example of such growth is the very common black growth on the bottom of shower curtains. The best
solution to keep these surfaces free from growth is frequent cleaning.
WATER QUALITY ISSUES:
SURFACE CLEANING:
Use common household, non-abrasive cleaners for most cleaning jobs. Rinse well and dry with a clean cloth.
Never use abrasive cleaners. Do not allow your Lucite® acrylic surface to come into contact with products such
as acetone (nail polish remover), nail polish, dry cleaning solution, lacquer thinners, gasoline, pine oil, etc.
Remove dust with a soft, dry cloth. Clean grease, oil, paint, and ink stains with isopropyl (rubbing) alcohol.
JET CLEANING:
All Infinity Series jets are removable, and can simply be put into the dishwasher for easy cleaning. See Jet
Operation Instructions for removal, pages 19-21. (Note: Use top rack of dishwasher and remove before the
drying cycle starts.)
SURFACE SCRATCH REMOVAL:
Minor scratches may be removed by polishing your tub with a non-abrasive car polish, followed by buffing.
Deeper scratches can be removed by:
• Sanding with wet 400 grit sandpaper.
• Sanding with wet 600 grit sandpaper.
• Sanding with wet micro-grit sandpaper.
• Buff out using car polish.
REPAIR:
The installation and service of your whirlpool bath should be performed only by a qualified service technician.
Remember when contacting your dealer always have your serial number, proof of purchase and model number
available. This will insure a quick response on warranty items.
The model and serial numbers are located above the pump on the backside of the whirlpool.
NOTE: ALL WARRANTY REPAIRS MUST BE AUTHORIZED BY AQUATIC BEFORE WORK IS STARTED.
FOR SERVICE, ALWAYS CONTACT YOUR DEALER.
CAUTION: Care should be taken to prevent inappropriate chemicals coming in contact with the Lucite® acrylic
surface. Please read and observe all instructions and/or warnings on containers containing substances you
contemplate applying to your whirlpool. Any failure to comply may void your warranty.