Agri-Fab 45-0462/45-0471 Spreader User Manual


  Open as PDF
of 20
 
5
AA
HH
D
STEP 4: (SEE FIGURE 4)
• Assemblethehandletube(D)tothehoppertubes
usingtwo5/16x3/4screws(AA)and5/16"lock
washers(HH).
STEP 5: (SEE FIGURE 5)
• Inserttheendsoftheowcontrolbail(E)intothe
handletube(D),insertingthebentendrst.Thebail
shouldpullbackfreelyagainstthehandle.
FIGURE 4
FIGURE 5
STEP 6: (SEE FIGURE 6)
• Inserttheendofthecableintotheowcontrolbail(E).
• Attachtheowcontrolassembly(B)usingtwo1/4-20
nylocknuts(FF).
HINT:Iftheboltsspinwhentightening,pullonthebolts
andturnthemuntiltheylockinplace.Pushinontheow
controldialtohelpkeeptheboltslockedinplacewhile
tightening.
FF
FIGURE 6
E
HH
AA
B
D
E
 previous next