Agri-Fab 45-0462/45-0471 Spreader User Manual


  Open as PDF
of 20
 
4
ASSEMBLY INSTRUCTIONS
STEP 2: (SEE FIGURE 2)
• Attachthestandtube(C)tothehoppertubesusing
two1/4-20x1-1/2hexbolts(BB),thetwopre-
assembledbolts,andfour1/4-20nylocknuts(FF).
STEP 3: (SEE FIGURE 3)
THIS STEP FOR MODEL 45-0471 ONLY
• Applyliquidsoaptotheinsideofthefoamgrip(II).
Workthesoapdownthelengthofthegriptocoat
theinside.Slidethegripontothehandle(D)untilitis
centered.
HINT:Thelesssoapleftinthegrip,thesoonerthegrip
willdryandbecomesnugonthehandle.
FIGURE 2
TOOLS REQUIRED FOR ASSEMBLY
(1) Hammer
(2) 7/16"Wrenches
(1) Knife or Scissors
Layoutandidentifypartsandhardwareusingthe
illustrations on pages 2 and 3.
BB
FF
FF
C
FIGURE 3
II
D
FIGURE 1
SPACER
PRE-ASSEMBLED
1/4" NYLOCK NUT
STEP 1: (SEE FIGURE 1)
• Removepre-assembled1/4"nylocknutsandspacers
frominsideofhoppertubes.Discardspacersonce
removed.Setaside1/4"nylocknutsforuseinstep2.
 previous next