Filter
Top Products
8
7. (Figure 14) Insert the bag frame strap into the stitched
sleeve along the front edge of the bag bottom.
8. (Figure 14) Assemble the bag frame strap to the lower
hopper side tubes using two 1/4" x 1-1/8" clevis pins
(Q) and 3/32" hair cotter pins (O).
9. (Figure 15) Secure the bag corners around the lower
hopper side tubes by snapping the bag aps to the bag
bottom on both sides.
5. (Figure 13) Place the assembled lower hopper tubes
into the bottom of the hopper bag
6. (Figure 13) Attach the ends of the lower hopper side
tubes to the inside of the upper hopper side tubes using
two 3/8" x 1/2" clevis pins (P) inserted from the inside,
and two 3/32" hair cotter pins (O).
13
14
15
4. (Figure 12) Turn the second rear hopper tube so that the
brace holes in the middle of the tube face up. Assemble
the ends of the rear hopper tube onto the ends of the
lower hopper side tubes. Fasten together using plastic
plugs (Z).
12
ENGLISH
LOWER
HOPPER
SIDE TUBE
PLASTIC PLUG (Z)
REAR HOPPER TUBE
(brace holes on top)
LOWER HOPPER
SIDE TUBE
HOPPER BAG
BOTTOM
UPPER HOPPER
SIDE TUBE
3/8" x 1/2"
CLEVIS PIN (P)
3/32" HAIR
COTTER PIN (O)
1/4" x 1-1/8"
CLEVIS PIN (Q)
3/32" HAIR
COTTER PIN (O)
BAG FRAME STRAP
SNAP
FLAP